波多野结衣伦理电影_精品色综合_日韩丰满孕妇孕交视频_色哒哒影院

工作原理：

SE系列螺桿擠出造粒機分單螺桿（SES）和雙螺桿（SET）型，擠出形式有前出料和側出料兩種。經混合、捏和的濕物料或軟化點（一般指小于50℃）物料在螺桿輸送、擠壓作用下，從機頭開孔模板擠出，再經過干燥或冷卻得到顆粒成品，從而實現將粉狀產品改變為均勻的顆粒產品的目的。顆粒形狀為圓柱狀，成品顆粒直徑可由模板開孔孔徑調節和控制；側出料為0.7-3.0mm，前出料為1.5-12mm，成粒率≥95%

Working Method:

SE  series of screw type extruding pelleter in clued single-screw type and double-screw-type. Two models of front and side for material to be extrudedWET material or material with low melting point  (general means <50C0) after being kneaded and mixed shall be extruded out from mould plate at the head of the plant due to being conveied and pressed by screws, and then be dried or cooled to from end products of particles so as to complete the course of Changing material from powder to particle.  The shaoe of grain is cylindrical. The dia of end grain can be choosed and controlled by means of changing the dia of holes in the mould plate: for side type is 0.7-3.0mm,for front type is 1.5-12mm.The rate of end product is equal to or more than 95%.

應用范圍:

廣泛適用于橡膠助劑、食品添加劑、塑料助劑、催化劑、農藥、燃料、顏料、日化、制藥等行業需造粒的產品。

Applied scope:

The plant is widely applied to material needs granulating such as Rubber auxiliary , Food Additive Plastic Auxiliary , Catalyzer, Agrochemicals, Dye, Pigment, daily chemicals, medicine etc .

江陰昌盛藥化機械有限公司（江陰市昌盛制藥機械廠），位于江陰市文林鎮，東連上海、南臨蘇州、無錫，地處“黃金通道”之稱的滬寧高速公路無錫東。本公司主營干燥機，混合機，制粒機，粉碎機等藥化設備。本公司有三十年的機械制造歷史、技術力量雄厚、工藝先進、設備齊全、由于生產及市場需要，本公司聘請了制藥、化工、食品機械方面的多名專家及工程技術人員，發展了一系列的制藥及化工機械設備，主要產品有中藥粉碎機、篩粉機、混合機、制粒機、干燥機等多種系列產品，為我國的制藥及化工、食品等行業的機械裝備更新換代作出了一定的貢獻！產品質量得到廣大用戶的一致好評。